When the turn signals on both sides are turned on at the same time, it plays a warning and widening role. When turning left out of the road, turning around or parking on a road without a central isolation belt, you should turn on the turn signal in advance and switch the headlights to the near beam, because if you turn on the turn signal with a high beam, the pedestrians and vehicles on the opposite side will be dazzzled by the headlights, and it is difficult to see the turn signal flashing.
The driving light, also known as the side light, is used to make the four corners of the vehicle visible, and the brightness is not as high as the headlights.This kind of lamp should be turned on on rainy days, dark days or in the underground parking lot. When the running lights are on, the sign shown in the figure will light up on the dashboard.
Frontlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal. Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4. The power of the bulb is 45~60W for high beam and 25~55W for low beam.
The outline light is the light installed in the four corners of the car and the top of the rear of the car, with Indicate the width and height of the front and rear of the car. The front of the light is white and the back is red. It is usually turned on at dusk, which means that it is mainly used when it is dark. I am familiar with the turn signal and turn signal.
Location light: installed in the front and rear of the car to indicate the existence and body width of the moving car. Brake light: installed at the rear, indicating that the moving car slows down or stops. Turn signal light: installed in the front, rear and side to indicate the steering of the car.
The lights of the car are as follows: headlights/headlights, turn the switch to the position in the figure.The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
Headlights/headlights, twist the switch to the position in the picture. The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
The position light, also known as the vehicle width indicator light, that is, the four lights in the front and rear of the car we usually see keep flashing, that is, the double flashing light, is when the vehicle encounters a problem and needs to park on the roadside. After turning on, it plays the role of warning positions for other vehicles.
Knob-type car light switch illustration Roof light switch logo illustration Roof light switch operationIt's relatively simple. When the light button in the car is in the middle position, the door will automatically light up in the car, and it can also be operated manually through the buttons on the left and right sides.
1. Rod-type light switch illustration The lever light switch is located on the left side of the steering wheel, which is simple and convenient to operate. As long as we turn to or dial to the designated position, the corresponding lights outside the car will turn on, and the dashboard will also light up the corresponding signs. Compared with the knob-type light switch, I believe that most car owners are more used to the lever-type light switch.
2. Lighting headlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal.Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4. The power of the bulb is 45~60W for high beam and 25~55W for low beam.
3. The headlights on the dashboard are shown in the figure. The headlight signs on it are door prompt, handbrake prompt, seat belt prompt, engine self-check, lubricating oil check, ABS system check, airbag check, battery prompt and fuel volume prompt.
4. When the turn signals on both sides are turned on at the same time, it plays the role of warning and widening. When turning left out of the road, turning around or parking on a road without a central isolation belt, you should turn on the turn signal in advance and switch the headlights to the near beam, because if you turn on the turn signal with a high beam, the pedestrians and vehicles on the opposite side will be dazzzled by the headlights, and it is difficult to see the turn signal flashing.
First, there is a car on the opposite side; second, the distance between the car in the same direction in front; third, when there is enough lighting on the road; fourth, when entering a busy street. Car taillights. Its function is a signal. It is composed of rear lights, reversing lights, brake lights, rear fog lights, turn signals and reflectors.
. Headlights: Also known as headlights, it is the most important lighting device on the car. Its function is to illuminate the road and objects in front of the car when driving at night to ensure driving safety; at the same time, it can also emit high beams.The light signal alternates with the near light to dazzle the other driver when overtaking at night and avoiding the car.
Low beam, after turning on the light switch, is generally a low beam. If not, turn the light pole in front of you. The high beam, turn the light pole to the front of the car. Turn the turn signal, turn left and dial the light pole counterclockwise, and turn right and dial the light rod clockwise.
Headlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal. Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4.The power of the bulb is 45~60W for high beam and 25~55W for low beam.
Frontlight sign: The headlight sign of the vehicle in front is divided into high beam and low beam. When the driver needs to drive at night or on a foggy day, he should use a lom beam to avoid direct sunlight on the eyes of the vehicle in front of him, resulting in blurred vision. When driving on the highway, high beams should be used to increase the range of vision and enhance forward alertness.
Illustration of the lever-type light switch The lever-type light switch is located on the left side of the steering wheel, which is simple and convenient to operate. As long as we turn to or dial to the designated position, the corresponding lights outside the car will turn on, and the dashboard will also light up the corresponding signs. Compared with the knob-type light switch, I believe that most car owners are more used to the lever-type light switch.
CarInstrument lighting sign illustration of the use of car lights The use of driving lights: driving lights are also called width indicator lights. Its function is to make the four corners of the vehicle visible to people, and the brightness is not as high as that of the headlights. This light should be turned on on rainy days, when the sky is dark or in the underground parking lot.
Headlights/headlights, twist the switch to the position in the picture. The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
The control of high beam and low beam is generally on the left lever of the steering wheel. As shown in the figure below: You can also see whether the high beam or low beam is turned on normally through the display of the dashboard.
Turn signal light: installed in the front, rear and side to indicate the steering of the car. Rear fog light: installed in the rear to improve fog, snow and other bad weather conditions, and the rear of the car can see the situation. Profile light: installed in the front and rear to mark the exterior of the car.
Frontlight sign: The headlight sign of the vehicle in front is divided into high beam and low beam. When the driver needs to drive at night or on a foggy day, he should use a lom beam to avoid direct sunlight on the eyes of the vehicle in front of him, resulting in blurred vision. When driving on the highway, high beams should be used to increase the range of vision and enhance forward alertness.
The upper left corner is the logo of the low beam lamp; the lower left corner is the logo of the high beam lamp; the upper right corner is the logo of the front fog light; the lower right corner is the logo of the rear fog light. The characteristic of the near-light sign is that the line segment is tilted to the lower left.The high beam sign is characterized by a straight line segment. The feature of the front fog light sign is that the line segments are on the left, and the line segments have vertical wavy lines.
Car light sign illustration There are many styles of cars, and the arrangement position of the light switch is different for each model, but the light switch logo has a unified standard, which can be divided into lever light switch and knob light switch according to different positions. If you want to use the lights skillfully, the most important thing is to find the position of the light switch.
The light line of the low beam sign is oblique downwards, while the light line of the high beam sign is straight forward. The light of the low beam shines down, and between 12 and 18 meters in front of the car, there is a very obvious light and dark cut-off line of the beam.
The roof light switch is the simplest. Generally, it will turn on automatically. It will light up when the door is opened in the car, and it can also be operated by hand.Just operate on the left and right sides.
*
supply chain intelligence-APP, download it now, new users will receive a novice gift pack.
When the turn signals on both sides are turned on at the same time, it plays a warning and widening role. When turning left out of the road, turning around or parking on a road without a central isolation belt, you should turn on the turn signal in advance and switch the headlights to the near beam, because if you turn on the turn signal with a high beam, the pedestrians and vehicles on the opposite side will be dazzzled by the headlights, and it is difficult to see the turn signal flashing.
The driving light, also known as the side light, is used to make the four corners of the vehicle visible, and the brightness is not as high as the headlights.This kind of lamp should be turned on on rainy days, dark days or in the underground parking lot. When the running lights are on, the sign shown in the figure will light up on the dashboard.
Frontlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal. Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4. The power of the bulb is 45~60W for high beam and 25~55W for low beam.
The outline light is the light installed in the four corners of the car and the top of the rear of the car, with Indicate the width and height of the front and rear of the car. The front of the light is white and the back is red. It is usually turned on at dusk, which means that it is mainly used when it is dark. I am familiar with the turn signal and turn signal.
Location light: installed in the front and rear of the car to indicate the existence and body width of the moving car. Brake light: installed at the rear, indicating that the moving car slows down or stops. Turn signal light: installed in the front, rear and side to indicate the steering of the car.
The lights of the car are as follows: headlights/headlights, turn the switch to the position in the figure.The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
Headlights/headlights, twist the switch to the position in the picture. The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
The position light, also known as the vehicle width indicator light, that is, the four lights in the front and rear of the car we usually see keep flashing, that is, the double flashing light, is when the vehicle encounters a problem and needs to park on the roadside. After turning on, it plays the role of warning positions for other vehicles.
Knob-type car light switch illustration Roof light switch logo illustration Roof light switch operationIt's relatively simple. When the light button in the car is in the middle position, the door will automatically light up in the car, and it can also be operated manually through the buttons on the left and right sides.
1. Rod-type light switch illustration The lever light switch is located on the left side of the steering wheel, which is simple and convenient to operate. As long as we turn to or dial to the designated position, the corresponding lights outside the car will turn on, and the dashboard will also light up the corresponding signs. Compared with the knob-type light switch, I believe that most car owners are more used to the lever-type light switch.
2. Lighting headlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal.Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4. The power of the bulb is 45~60W for high beam and 25~55W for low beam.
3. The headlights on the dashboard are shown in the figure. The headlight signs on it are door prompt, handbrake prompt, seat belt prompt, engine self-check, lubricating oil check, ABS system check, airbag check, battery prompt and fuel volume prompt.
4. When the turn signals on both sides are turned on at the same time, it plays the role of warning and widening. When turning left out of the road, turning around or parking on a road without a central isolation belt, you should turn on the turn signal in advance and switch the headlights to the near beam, because if you turn on the turn signal with a high beam, the pedestrians and vehicles on the opposite side will be dazzzled by the headlights, and it is difficult to see the turn signal flashing.
First, there is a car on the opposite side; second, the distance between the car in the same direction in front; third, when there is enough lighting on the road; fourth, when entering a busy street. Car taillights. Its function is a signal. It is composed of rear lights, reversing lights, brake lights, rear fog lights, turn signals and reflectors.
. Headlights: Also known as headlights, it is the most important lighting device on the car. Its function is to illuminate the road and objects in front of the car when driving at night to ensure driving safety; at the same time, it can also emit high beams.The light signal alternates with the near light to dazzle the other driver when overtaking at night and avoiding the car.
Low beam, after turning on the light switch, is generally a low beam. If not, turn the light pole in front of you. The high beam, turn the light pole to the front of the car. Turn the turn signal, turn left and dial the light pole counterclockwise, and turn right and dial the light rod clockwise.
Headlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal. Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4.The power of the bulb is 45~60W for high beam and 25~55W for low beam.
Frontlight sign: The headlight sign of the vehicle in front is divided into high beam and low beam. When the driver needs to drive at night or on a foggy day, he should use a lom beam to avoid direct sunlight on the eyes of the vehicle in front of him, resulting in blurred vision. When driving on the highway, high beams should be used to increase the range of vision and enhance forward alertness.
Illustration of the lever-type light switch The lever-type light switch is located on the left side of the steering wheel, which is simple and convenient to operate. As long as we turn to or dial to the designated position, the corresponding lights outside the car will turn on, and the dashboard will also light up the corresponding signs. Compared with the knob-type light switch, I believe that most car owners are more used to the lever-type light switch.
CarInstrument lighting sign illustration of the use of car lights The use of driving lights: driving lights are also called width indicator lights. Its function is to make the four corners of the vehicle visible to people, and the brightness is not as high as that of the headlights. This light should be turned on on rainy days, when the sky is dark or in the underground parking lot.
Headlights/headlights, twist the switch to the position in the picture. The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
The control of high beam and low beam is generally on the left lever of the steering wheel. As shown in the figure below: You can also see whether the high beam or low beam is turned on normally through the display of the dashboard.
Turn signal light: installed in the front, rear and side to indicate the steering of the car. Rear fog light: installed in the rear to improve fog, snow and other bad weather conditions, and the rear of the car can see the situation. Profile light: installed in the front and rear to mark the exterior of the car.
Frontlight sign: The headlight sign of the vehicle in front is divided into high beam and low beam. When the driver needs to drive at night or on a foggy day, he should use a lom beam to avoid direct sunlight on the eyes of the vehicle in front of him, resulting in blurred vision. When driving on the highway, high beams should be used to increase the range of vision and enhance forward alertness.
The upper left corner is the logo of the low beam lamp; the lower left corner is the logo of the high beam lamp; the upper right corner is the logo of the front fog light; the lower right corner is the logo of the rear fog light. The characteristic of the near-light sign is that the line segment is tilted to the lower left.The high beam sign is characterized by a straight line segment. The feature of the front fog light sign is that the line segments are on the left, and the line segments have vertical wavy lines.
Car light sign illustration There are many styles of cars, and the arrangement position of the light switch is different for each model, but the light switch logo has a unified standard, which can be divided into lever light switch and knob light switch according to different positions. If you want to use the lights skillfully, the most important thing is to find the position of the light switch.
The light line of the low beam sign is oblique downwards, while the light line of the high beam sign is straight forward. The light of the low beam shines down, and between 12 and 18 meters in front of the car, there is a very obvious light and dark cut-off line of the beam.
The roof light switch is the simplest. Generally, it will turn on automatically. It will light up when the door is opened in the car, and it can also be operated by hand.Just operate on the left and right sides.
*Global supply chain partner networks
author: 2024-12-23 22:31Identify duty-free items via HS code
author: 2024-12-23 22:21Global product lifecycle by HS code
author: 2024-12-23 20:14HS code-based invoice matching
author: 2024-12-23 19:59HS code-based tariff reconciliation
author: 2024-12-23 19:53Global trade resource libraries
author: 2024-12-23 22:23Ceramic tiles HS code classification
author: 2024-12-23 21:52HS code strategies for trade diversification
author: 2024-12-23 21:26HS code-based invoice validation
author: 2024-12-23 20:33Free global trade data sources
author: 2024-12-23 20:22
HS code-based freight consolidation
771.48MB
Check
Trade data for import tariff planning
978.26MB
Check
Trade data-driven market penetration
815.61MB
Check
Agritech products HS code classification
421.39MB
Check
Global trade data pipelines
368.53MB
Check
HS code for artisanal goods
991.39MB
Check
Agribusiness HS code-based analysis
491.13MB
Check
How to comply with global trade regulations
312.65MB
Check
Identifying growth markets via HS code data
435.71MB
Check
HS code-based risk profiling for exporters
729.45MB
Check
Processed meat HS code verification
982.31MB
Check
Medical PPE HS code verification
958.85MB
Check
How to understand INCOTERMS with data
624.45MB
Check
HS code accuracy for automotive exports
923.68MB
Check
HS code validation for diverse industries
511.14MB
Check
Best trade data solutions for startups
985.53MB
Check
Forestry products HS code insights
788.64MB
Check
Rubber exports HS code classification
438.63MB
Check
Global trade fair insights
144.14MB
Check
customs transaction analysis
443.57MB
Check
Predictive trade data cleaning
366.65MB
Check
Logistics optimization by HS code
965.75MB
Check
Comparing duty rates across markets
179.28MB
Check
How to find niche import markets
972.99MB
Check
Free global trade data sources
235.43MB
Check
How to track competitor import export data
231.86MB
Check
Advanced shipment analytics software
545.83MB
Check
Global trade intelligence newsletter
494.46MB
Check
HS code-driven margin analysis
759.25MB
Check
Precious stones HS code classification
748.63MB
Check
Premium trade data intelligence subscriptions
387.19MB
Check
HS code directory for imports
968.96MB
Check
HS code-driven cross-border e-commerce
486.97MB
Check
International trade compliance workflow
565.96MB
Check
Country tariff schedules by HS code
975.25MB
Check
HS code trends in textiles and apparel
545.34MB
Check
Scan to install
supply chain intelligence to discover more
Netizen comments More
982 How to interpret bill of lading data
2024-12-23 21:54 recommend
2595 HS code-based competitive advantage analysis
2024-12-23 21:35 recommend
978 Minimizing duties via HS code optimization
2024-12-23 21:19 recommend
1732 Identifying duty exemptions via HS code
2024-12-23 21:03 recommend
2005 HS code-driven risk mitigation
2024-12-23 20:48 recommend