Processed grains HS code references

List of the catalog of this article:

• 1,Processed grains HS code references What engine does Chang'an Suzuki Antelope use
• 2, May I ask the old masters, from the perspective of fuel saving, when the engine speed is...
• 3, It is said that Suzuki Yuyan uses an antelope engine, 1.Are 3 and 1.5 both antelope engines? This car...
• 4, Engine difference between swallow and antelope (detail point)
• 5, Suzuki Antelope 1.3 How about the engine
• 6, Which is better, Zhongtai z100 or antelope engine

What engine does Chang'an Suzuki Antelope use

1. Good. The Suzuki Antelope 3 engine uses a 3-liter naturally aspirated four-cylinder engine. Equipped with multi-point injection technology, it adopts aluminum alloy cylinder head and cylinder block, and has a 5-speed manual transmission or 3-speed automatic transmission. The configuration is high, so it is good.

2. The JL474 engine is a domestic Suzuki G13, which was first used in the joint venture model Antelope, and later it was used in many Chang'an car models such as Yuyan, Benben and CX20. JL474 has made some improvements compared with the G13, such as replacing the old one with electronic ignition. The electrical appliance was ignited and matched with Delphi's electric injection system and so on.

3. Antelope is a small car under Chang'an Suzuki. The engine of this car uses Suzuki's technology, but the engine of this car is not imported. The whole antelope series uses a 3-liter naturally aspirated engine. The wheelbase of the antelope is 2365 mm, and the length, width and height are 4,105 mm, 1590 mm and 1395 mm respectively.

May I ask the old masters, from the perspective of fuel saving, when the engine speed is...

1. Generally, it is enough to observe the engine speed, and it is best to shift gears when the engine speed is about 2000 rpm. [ If there is a problem with the car, ask the car master.4S store professional technician, 10 minutes to solve.

2. Generally, you can change gears when it reaches about 2,000 rpm. The gearshift speed can generally be changed between 1500-2500rpm. If you want to start from the perspective of fuel economy, you can shift gears around 1500-1800rpm. The low-speed gear can be appropriately increased to 2000rpm. It is best to reduce the gearshift speed during the running-in period.

3. It is best to change gears by looking at the car manual, which is usually required by engine speed. Various engines are different. Nowadays, cars generally change gears at 2500~3000, because usually the best driving speed of a car is 2000 rm. Too low gear shift speed will make the engine run at low speed for a long time, which is not good for the machine, and basically has no fuel-saving effect.

4. The speed range of most gear shifting of the current engine is about 1800-2200, which is neither fuel-consuming nor laborious. And when the driver needs different acceleration efficiency, the optimal speed of gear shifting is also different. There is no need to memorize a shift value, but the suitable speed for shifting is still found according to a certain regularity.

It is said that Suzuki Swift uses an antelope engine, and 1.3 and 1.5 are both antelope engines? This car...

Well, so to speak, this phenomenon is common in various manufacturers, because in the same period, twoEngines with the same displacement and technology can only bring some adverse effects such as rising costs, and then rising car prices, reducing sales, and reducing corporate profits.

Yuyan is equipped with 3L and 5L naturally aspirated engines. Yuyan is a small car launched by Chang'an Suzuki Automobile. The official guide price of this car is 480,000-280,000 yuan.

The number of passengers is one person, which saves fuel by 5 to 3. Conclusion: 3 Although it is an antelope engine, due to displacement and other reasons, if the number of passengers remains one or two, and they do not often run long distances, it is still better than 1. 5 Save fuel. The suggestion for purchasing 3 is.

To be precise, the engine of the swallow should come from the improved antelope engine. The two styles are basically the same.

There is no idling jitter, the fuel consumption is lower, and the quality and durability are better.

The difference between the engine between the swallow and the antelope (detailed point)

The engine of the swallow is an improved version of the antelope. The intake and exhaust structure of the swallow engine is a newly designed electronic control system with dual ignition coils. . But after all, it is the same engine, and the power is relatively weak.

To be precise, the engine of the swallow should come from the improved antelope engine. The two styles are basically the same.

The new antelope distributor is purely imported. If you have the internal information of the 4S store, you can have a look. There are only four parts of the new sheep's engine that are purely imported, including distributors.) The cost of canceling the distributor should be reduced for the manufacturer.

The lift engine and Resa's es350 are the same engine.In the end, I still want to say, who said that the engine can only be used by the antelope? Even if the engine has been assembled by the antelope, is it good or bad? As far as I know, the antelope looks very ordinary, and even a little indistinguishable from Charley, but the antelope is very fuel-efficient and sufficient.

This machine model is made in Jiangling at the beginning of JL. As for the swallow and the antelope machine, there is no difference.

How about Suzuki Antelope 1.3 engine

Good. The Suzuki Antelope 3 engine uses a 3-liter naturally aspirated four-cylinder engine. Equipped with multi-point injection technology, it adopts aluminum alloy cylinder head and cylinder block, and has a 5-speed manual transmission or 3-speed automatic transmission. The configuration is high, so it is good.

Good. Power: SuzukiThe maximum power of the Antelope 3 engine is 67kw, the maximum torque is 115 Nm, the maximum power speed is 6000 rpm, and the maximum torque speed is 2500 to 3500 rpm. The power output is smooth and the gear is clear, so it is good.

Powerful, fuel-saving, etc. The Suzuki Antelope 3 engine is a naturally aspirated four-cylinder engine, with a maximum power of 85 horsepower, comparable to the same type of 6-liter engine, and powerful. Moreover, this engine is made of all-aluminum alloy, which is light in weight. By reducing the weight, it can achieve fuel economy and has good fuel economy.

Which is better, Zhongtai z100 or Antelope engine

Zhongtai Z100. Zhongtai Z100 adopts Zhongtai Company'sThe mainly developed 0L naturally aspirated engine, supplemented by BOSCH to provide an electronic fuel injection system, can achieve accurate and stable fuel injection and ignition, so that the fuel utilization rate is higher and more energy-saving and fuel-saving. The antelope engine has low power, loud noise, and emits more pollutants.

Good. High-strength body and collapse energy absorption space design: Zhongtai Z100 adopts high-strength body and collapse energy absorption space design. The vehicle can effectively absorb and disperse the impact force in the event of a collision to protect the safety of the occupants in the vehicle. This design can improve the durability of the vehicle and have better collision resistance in unexpected situations.

Good. In terms of price: Zhongtai Z100 is a small car with a fashionable appearance, rich functions, good power and handling performance, and high cost performance. In terms of configuration: Zhongtai Z100 has rich configurations, adjustable headlight height, four-door electric doors and windows, etc. The maximum power of the 0L engine is 99 horsepower, which is affordable.

Good fuel economy: Suzuki Antelope 3 engine performs excellently in terms of fuel economy. It can effectively utilize every drop of gasoline and convert it into more energy needed to drive the vehicle. The excellent technology of the Swallow Family ensures that the engine has made remarkable progress in saving the cost of the Swallow Family.