1. For positive timing, there is a positioning pin on 1 crankshaft aimed at the timing mark directly above. The crankshaft mark on the chain is installed at about 4 o'clock.
2. Such as CVVT, MPI, etc., make the fuel utilization rate higher, so that the engine's fuel economy is better. The quality of this engine is very good, with sufficient power and durability.The G4FS car engine is a car engine system developed and produced by Hyundai Kia Group of South Korea and launched in 2012.
3. OK. This engine was launched in 2012 for the automobile engine system developed and produced by South Korea's Hyundai Kia Group. G4FL is a branch of the G4F series and has met the strict national 6b emission standards.
4. Alim the crankshaft according to the mark on the timing pulley of the crankshaft. Generally, the stop position of the piston of 1 cylinder is required. When installing the camshaft, the mark on the pulley is aligned with the camshaft, and the double camshaft is aligned with the two camshaft positions respectively. Just install the timing belt/chain.
The ignition coil used in the fire system.Voltage grade code: use numbers to represent the rated voltage of the ignition coil, that is, 1---12V; 2---24V; 6---6V.
Accurately and reliably generate electric sparks to ignite the combustible mixture, so that the engine works. The engine ignition system can be divided into traditional battery ignition system, electronic ignition system, microcomputer control ignition system and magnetic motor ignition system according to its composition and high-voltage electricity generation method.
Including CVVT and MPI, etc. CVVT technology can optimize valve timing and improve combustion efficiency: while MPI technology can accurately control the amount of fuel injection to make combustion more adequate. The application of technology makes the G4FS engine excellent in fuel economy and can provide low fuel consumption.
The function of the ignition system of the car gasoline engine is to ignite the combustible mixture to make the engine start.
The ignition system is divided into traditional ignition system and electronic ignition system. The car ignition system includes ignition switch, ignition coil, distributor assembly, spark plug, etc. Its function is to generate high-voltage electric sparks and ignite the mixed gas in the cylinder of the gasoline engine.
Due to the cancellation of the distributor and high-voltage line, the loss of energy conduction and leakage loss is extremely small, and there is no mechanical wear. Moreover, the ignition coil and spark plug of each cylinder are assembled together, and the external metal is wrapped, which greatly reduces electromagnetic interference and can ensure the normal operation of the engine electronic control system.
1. Install the iddler 1 and tighten the bolt 2 according to the specified torque (as follows). 08 Temporarily install timing belt tensioner 1 (below). 09 Install the timing belt, that is, the crankshaft sprocket idler camshaft sprocket 3 and the timing belt tensioner 4. The installation order is shown in the figure below. 10 Adjust the tension of the timing belt.
2. First, install the camshaft of the Beijing Hyundai engine. Install the tensioner of the timing belt of the Beijing Hyundai engine. Find the gap on the camshaft of Beijing Hyundai and parallel this gap with the cylinder head of Beijing Hyundai engine.Find the arrow mark on the Beijing Hyundai crank disc.
3. Prepare the hexagonal tool and tighten the timing of the wheel screw tool. Use the hexagonal head to rotate the timing tensioning device counterclockwise, and the hand swings on the tensioning device at this time. When the V-shaped mark on the tension device, swing into the bolt, and be careful not to exceed too much.
4. Hang the Hyundai Ruiyi engine on 2 camshafts. Install the guide strip of the Hyundai Ruiyi engine. Tighten the screw of the fixed guide strip of the Hyundai Ruiyi engine. Hang the bottom of the Hyundai Ruiyi engine on the tensioner. Lock the Hyundai Ruiyi engine tensioner and install it.
5. The exhaust camshaft on the other side of the 4y engine is also on the specially marked timing chain. Connect the yellow link of the large chain of the 4y engine to the gap of the middle shaft.Align the marker point of the 4y engine crankshaft at the yellow link on the timing chain. Finally, install the 4y engine tensioner and fix the chain to complete the timing.
G63 displacement is 0, 4G64G69 is 4. These three engines are all single overhead camshaft (SOHC), focusing on low speed and high torque, and the output is very linear. It is especially suitable for driving in the city. The difference between 4G69 and 4G64 and 4G63 is that 69 adds variable valve timing technology to further squeeze the power of the engine.
Different.4G63 is the displacement of 0, and 4G64 is 4.
g63s4n and 4G69S4N are not universal. 4g63s4n and 4G69S4N are not the same engine and cannot be used universally.
Except for 4G63, the engines in the early stage of 4G are basically domestic. 4G69 is the 4G93 version originally installed on Pajero. BYD Hafei and others all use Mitsubishi. Because this is more cost-effective and the technology is older. Now Mitsubishi no longer produces 4G machines, and the latest technology is the 4B series.
1. Good. In terms of quality. The Haval gw4g15m engine adopts more durable materials, which can better ensure the long-term use effect and good quality of the engine.In terms of performance.
2. The maximum horsepower is 130Ps, and the cylinder material is aluminum, etc. The intake form of the G4GB model engine is naturally aspirated; the number of cylinders is 4; the cylinder diameter is 82mm; the maximum horsepower is 130Ps; the maximum power speed is 6000rpm; the maximum torque speed is 4600rpm; the cylinder material is aluminum, etc.
3. This engine can release a maximum power of 96kW when the speed reaches 6000rpm, and the maximum torque reaches 162N when the speed is 4500rpm? M. The application of CVVT technology not only improves the power of the engine, but also improves the utilization rate of fuel, thus reducing fuel consumption and emissions.
4. The advantage is large power, but the disadvantage is high cost. It adopts a 5L naturally aspirated engine, with a maximum power of 115 horsepower and a peak torque of 156 Nm, which meets the national six emission standards.The cost of the 4GFS engine is relatively high, and the maintenance and upkeep are more complicated, requiring a higher level of technology and equipment.
5. Advantages: The fuel consumption of the g4fg engine is relatively low, the technology is relatively advanced, and the thermal efficiency is very high. It can achieve the maximum endurance and power with the lowest fuel consumption. The fuel consumption per 100 kilometers is maintained within seven liters. It is light in mass and small in size, which makes the layout of the car more reasonable and convenient for hybrid vehicles. The installation of the electric motor.
6. Durable. The G4FL engine adopts an aluminum alloy cylinder block. The aluminum alloy has the characteristics of high strength and lightness, and its crankshaft is made of high-strength steel, which has high strength and wear resistance, so it is relatively durable.
*Automotive supply chain transparency tools-APP, download it now, new users will receive a novice gift pack.
1. For positive timing, there is a positioning pin on 1 crankshaft aimed at the timing mark directly above. The crankshaft mark on the chain is installed at about 4 o'clock.
2. Such as CVVT, MPI, etc., make the fuel utilization rate higher, so that the engine's fuel economy is better. The quality of this engine is very good, with sufficient power and durability.The G4FS car engine is a car engine system developed and produced by Hyundai Kia Group of South Korea and launched in 2012.
3. OK. This engine was launched in 2012 for the automobile engine system developed and produced by South Korea's Hyundai Kia Group. G4FL is a branch of the G4F series and has met the strict national 6b emission standards.
4. Alim the crankshaft according to the mark on the timing pulley of the crankshaft. Generally, the stop position of the piston of 1 cylinder is required. When installing the camshaft, the mark on the pulley is aligned with the camshaft, and the double camshaft is aligned with the two camshaft positions respectively. Just install the timing belt/chain.
The ignition coil used in the fire system.Voltage grade code: use numbers to represent the rated voltage of the ignition coil, that is, 1---12V; 2---24V; 6---6V.
Accurately and reliably generate electric sparks to ignite the combustible mixture, so that the engine works. The engine ignition system can be divided into traditional battery ignition system, electronic ignition system, microcomputer control ignition system and magnetic motor ignition system according to its composition and high-voltage electricity generation method.
Including CVVT and MPI, etc. CVVT technology can optimize valve timing and improve combustion efficiency: while MPI technology can accurately control the amount of fuel injection to make combustion more adequate. The application of technology makes the G4FS engine excellent in fuel economy and can provide low fuel consumption.
The function of the ignition system of the car gasoline engine is to ignite the combustible mixture to make the engine start.
The ignition system is divided into traditional ignition system and electronic ignition system. The car ignition system includes ignition switch, ignition coil, distributor assembly, spark plug, etc. Its function is to generate high-voltage electric sparks and ignite the mixed gas in the cylinder of the gasoline engine.
Due to the cancellation of the distributor and high-voltage line, the loss of energy conduction and leakage loss is extremely small, and there is no mechanical wear. Moreover, the ignition coil and spark plug of each cylinder are assembled together, and the external metal is wrapped, which greatly reduces electromagnetic interference and can ensure the normal operation of the engine electronic control system.
1. Install the iddler 1 and tighten the bolt 2 according to the specified torque (as follows). 08 Temporarily install timing belt tensioner 1 (below). 09 Install the timing belt, that is, the crankshaft sprocket idler camshaft sprocket 3 and the timing belt tensioner 4. The installation order is shown in the figure below. 10 Adjust the tension of the timing belt.
2. First, install the camshaft of the Beijing Hyundai engine. Install the tensioner of the timing belt of the Beijing Hyundai engine. Find the gap on the camshaft of Beijing Hyundai and parallel this gap with the cylinder head of Beijing Hyundai engine.Find the arrow mark on the Beijing Hyundai crank disc.
3. Prepare the hexagonal tool and tighten the timing of the wheel screw tool. Use the hexagonal head to rotate the timing tensioning device counterclockwise, and the hand swings on the tensioning device at this time. When the V-shaped mark on the tension device, swing into the bolt, and be careful not to exceed too much.
4. Hang the Hyundai Ruiyi engine on 2 camshafts. Install the guide strip of the Hyundai Ruiyi engine. Tighten the screw of the fixed guide strip of the Hyundai Ruiyi engine. Hang the bottom of the Hyundai Ruiyi engine on the tensioner. Lock the Hyundai Ruiyi engine tensioner and install it.
5. The exhaust camshaft on the other side of the 4y engine is also on the specially marked timing chain. Connect the yellow link of the large chain of the 4y engine to the gap of the middle shaft.Align the marker point of the 4y engine crankshaft at the yellow link on the timing chain. Finally, install the 4y engine tensioner and fix the chain to complete the timing.
G63 displacement is 0, 4G64G69 is 4. These three engines are all single overhead camshaft (SOHC), focusing on low speed and high torque, and the output is very linear. It is especially suitable for driving in the city. The difference between 4G69 and 4G64 and 4G63 is that 69 adds variable valve timing technology to further squeeze the power of the engine.
Different.4G63 is the displacement of 0, and 4G64 is 4.
g63s4n and 4G69S4N are not universal. 4g63s4n and 4G69S4N are not the same engine and cannot be used universally.
Except for 4G63, the engines in the early stage of 4G are basically domestic. 4G69 is the 4G93 version originally installed on Pajero. BYD Hafei and others all use Mitsubishi. Because this is more cost-effective and the technology is older. Now Mitsubishi no longer produces 4G machines, and the latest technology is the 4B series.
1. Good. In terms of quality. The Haval gw4g15m engine adopts more durable materials, which can better ensure the long-term use effect and good quality of the engine.In terms of performance.
2. The maximum horsepower is 130Ps, and the cylinder material is aluminum, etc. The intake form of the G4GB model engine is naturally aspirated; the number of cylinders is 4; the cylinder diameter is 82mm; the maximum horsepower is 130Ps; the maximum power speed is 6000rpm; the maximum torque speed is 4600rpm; the cylinder material is aluminum, etc.
3. This engine can release a maximum power of 96kW when the speed reaches 6000rpm, and the maximum torque reaches 162N when the speed is 4500rpm? M. The application of CVVT technology not only improves the power of the engine, but also improves the utilization rate of fuel, thus reducing fuel consumption and emissions.
4. The advantage is large power, but the disadvantage is high cost. It adopts a 5L naturally aspirated engine, with a maximum power of 115 horsepower and a peak torque of 156 Nm, which meets the national six emission standards.The cost of the 4GFS engine is relatively high, and the maintenance and upkeep are more complicated, requiring a higher level of technology and equipment.
5. Advantages: The fuel consumption of the g4fg engine is relatively low, the technology is relatively advanced, and the thermal efficiency is very high. It can achieve the maximum endurance and power with the lowest fuel consumption. The fuel consumption per 100 kilometers is maintained within seven liters. It is light in mass and small in size, which makes the layout of the car more reasonable and convenient for hybrid vehicles. The installation of the electric motor.
6. Durable. The G4FL engine adopts an aluminum alloy cylinder block. The aluminum alloy has the characteristics of high strength and lightness, and its crankshaft is made of high-strength steel, which has high strength and wear resistance, so it is relatively durable.
*Bio-based plastics HS code classification
author: 2024-12-23 23:05How to manage complex supply chains with data
author: 2024-12-23 22:37Food industry HS code classification
author: 2024-12-23 20:55Global supplier scorecard templates
author: 2024-12-23 20:54Minimizing duties via HS code optimization
author: 2024-12-23 22:58How to secure international sourcing
author: 2024-12-23 22:45How to find niche import markets
author: 2024-12-23 22:15Trade intelligence for marine cargo
author: 2024-12-23 21:14678.67MB
Check225.31MB
Check797.39MB
Check252.83MB
Check823.95MB
Check431.61MB
Check312.77MB
Check151.34MB
Check366.21MB
Check329.47MB
Check531.72MB
Check944.44MB
Check556.92MB
Check219.94MB
Check548.12MB
Check198.49MB
Check714.55MB
Check695.79MB
Check151.15MB
Check497.54MB
Check681.25MB
Check566.73MB
Check954.65MB
Check892.12MB
Check745.87MB
Check893.55MB
Check644.32MB
Check325.84MB
Check255.53MB
Check729.61MB
Check868.28MB
Check415.98MB
Check135.29MB
Check818.99MB
Check781.49MB
Check479.29MB
CheckScan to install
Automotive supply chain transparency tools to discover more
Netizen comments More
2606 Livestock products HS code classification
2024-12-23 23:29 recommend
876 global trade intelligence
2024-12-23 23:25 recommend
2230 HS code-driven product bundling strategies
2024-12-23 22:54 recommend
2620 Tire imports HS code classification
2024-12-23 22:40 recommend
284 How to integrate AI in trade data analysis
2024-12-23 21:33 recommend