1. Open the driver's side door. Pull back the hood under the A-pillar to open the wrench. At this time, the front hood will open a gap. Lift the front hood up with your hands. Use the hood support rod to firmly support the hood.
2. Use your hand to pull out to open the hood. There is also a clip in the middle of the front part of the hood. You can lift the hood by clamping two fingers. In most car hoods, the driver's left calf facing the front of the car has an open handle at the bottom of the instrument. After pulling, the hood will bounce back about 1cm.
3. Polo hood needs to be in the cabPull the engine cover lock in the position of the driver's seat, and then pull the engine hood wrench to open the hood.
[Advantages] ea113 is an eight-valve engine, that is to say, every Two valves in the cylinder: one in and one out, while the ea111 is a 16-valve engine. From a technical point of view, the 16-valve engine technology is indeed more advanced, but the eight-valve engine technology of ea113 is more mature, convenient to maintain and low cost.
Volkswagen engine models are: EA21EA11EA11EA88EA390 these enginesThe machine integrates advanced technologies such as in-cylinder direct injection and turbocharging, and has the advantages of small displacement, high power, low fuel consumption and so on.
EA113 engine series, the A113 is an eight-bal valve engine, that is, two valves per cylinder: one in and one out. From a technical point of view, EA113 is lagging behind the EA111 with 16 valves. New Baolai, Land Rover, POLO and Golf are equipped with EA113 series engines.
EA111 is used in the small displacement series. The displacement of 111 is mainly 4 and 6, which also includes natural intake and turbocharging. The host of these displacements uses the 111 platform.
Volkswagen has several engine models. There are 5 types of Volkswagen engine types and Volkswagen series engine models, which are: EA21EA11EA11EA88EA390, these engines integrate in-cylinder direct injection, turbocharging and other advanced technologies, and have the advantages of small displacement, high power, low fuel consumption and so on.
1. Close the engine hatch cover: lift the engine hatch slightly, remove the engine compartment cover support rod, and then put it into the support in the front bracket.
2. Turn off the engine cover: lift the engine cover slightly, remove the engine cover support rod, and then put it into the rubber support in the front cover bracket.
3. Close the engine cover: gently lift the engine cover, remove the engine cover support rod, and then stuck it into the bracket in the front wall bracket; at a height of about 30cm away from the front wall lock bracket, let the engine hood fall freely and hold it without pressure!If the hood is not closed, it must be turned on again and then closed correctly.
4. First, open the door of the main driver of the Volkswagen Swift. There is a wrench under the central console (at the junction of the door and the car body, close to the floor). You can open the hood by pulling it outward with your hand. There is also a card in the center of the front of the hood, and you can lift the hood with two fingers and a pinch.
5. There is a strange sound in the engine. Symptom description: There is a high possibility of abnormal noise in the engine compartment. Most people also judge from the sound source that it is the abnormal sound of the engine compartment, which is usually a harsh metal sound or a wind whistle. Solution: The technical status of a certain mechanism of the engine has changed.
6. Next, we will share with you the diagram of the internal parts of the engine compartment, hoping to help you understand the structure and function of the internal parts of the engine compartment.Take the 4A13 engine as an example.
Everyone must first unlock the engine hatch from the car to open the engine compartment of the Touran, and there is an engine hatch unlocking door on the driver's side foot. Pull your hand, you can unlock it with one pull. After unlocking, the engine cover will bounce back a small gap. Put your hand into the gap above the car logo and lift the door handle to open the engine cover.
The Volkswagen Touran engine cover switch is in the cab, and the light switch is located below. You can open the engine cover by pulling the latch, and use the toppost to hold the engine cover. The engine cover has the function of protecting the engine and the effect of soundproofing.
Under the left front dashboard, the disassembly needs to pry out a card behind the handle.
The Touareg engine compartment lock switch is on the left leg of the cab, and the engine compartment lock will be unlocked by pulling the switch. After the engine compartment is unlocked, you can pull the lid in front of the engine compartment cover and lift the engine compartment cover. Then use the hydraulic rod of the engine cover to support the engine cover.
1. The engine compartment switch of Volkswagen Touareg is located in the lower left corner of the driver's seat, As shown in the figure below, we can lift the handle along the arrow, lift the engine cover and open it, then remove the engine cover support rod from its fixed bracket, and finally hang the engine cover support rod into the groove indicating the engine cover.
2. The engine hood switch of Volkswagen Touareg is located in the lower left corner of the driver's seat. As shown in the figure below, we can lift the handle along the arrow, lift the engine hood and open it, and then support the engine hood.Remove it from its fixing bracket, and finally hang the engine compartment cover support rod into the groove indicating the engine compartment cover.
3. To open the hood of SAIC Volkswagen Touareg, you need to enter the main driver's seat of the vehicle first and find the hood switch at the bottom left. Next, according to the operation method in the figure below, lift the hood switch of SAIC Volkswagen Touareg, and you can pop up the hood latch of SAIC Volkswagen Touareg.
4. The hood switch is in the car and needs to be turned on manually. The position of the switch is around the foot pedal. You can see that there is a switch button on the left side of the foot pedal. Press the switch to open the outer hood.
5. The switch of the Volkswagen Touareg hood is in the car, on the left side of the driver's seat. 02 On the left side of the foot pedal, we can see a device similar to a handle. If you open the handle along the arrow, the hood switch will open.03 Then lift the hood by hand and support it with a hydraulic cylinder.
6. The hood switch is in the car and needs to be turned on manually. The position of the switch is around the foot pedal. There is a switch button on the left side of the pedal. We can press the switch to open the outer hood. Put the hydraulic cylinder of the hood into the groove of the hood to support it.
HS code intelligence in freight auditing-APP, download it now, new users will receive a novice gift pack.
1. Open the driver's side door. Pull back the hood under the A-pillar to open the wrench. At this time, the front hood will open a gap. Lift the front hood up with your hands. Use the hood support rod to firmly support the hood.
2. Use your hand to pull out to open the hood. There is also a clip in the middle of the front part of the hood. You can lift the hood by clamping two fingers. In most car hoods, the driver's left calf facing the front of the car has an open handle at the bottom of the instrument. After pulling, the hood will bounce back about 1cm.
3. Polo hood needs to be in the cabPull the engine cover lock in the position of the driver's seat, and then pull the engine hood wrench to open the hood.
[Advantages] ea113 is an eight-valve engine, that is to say, every Two valves in the cylinder: one in and one out, while the ea111 is a 16-valve engine. From a technical point of view, the 16-valve engine technology is indeed more advanced, but the eight-valve engine technology of ea113 is more mature, convenient to maintain and low cost.
Volkswagen engine models are: EA21EA11EA11EA88EA390 these enginesThe machine integrates advanced technologies such as in-cylinder direct injection and turbocharging, and has the advantages of small displacement, high power, low fuel consumption and so on.
EA113 engine series, the A113 is an eight-bal valve engine, that is, two valves per cylinder: one in and one out. From a technical point of view, EA113 is lagging behind the EA111 with 16 valves. New Baolai, Land Rover, POLO and Golf are equipped with EA113 series engines.
EA111 is used in the small displacement series. The displacement of 111 is mainly 4 and 6, which also includes natural intake and turbocharging. The host of these displacements uses the 111 platform.
Volkswagen has several engine models. There are 5 types of Volkswagen engine types and Volkswagen series engine models, which are: EA21EA11EA11EA88EA390, these engines integrate in-cylinder direct injection, turbocharging and other advanced technologies, and have the advantages of small displacement, high power, low fuel consumption and so on.
1. Close the engine hatch cover: lift the engine hatch slightly, remove the engine compartment cover support rod, and then put it into the support in the front bracket.
2. Turn off the engine cover: lift the engine cover slightly, remove the engine cover support rod, and then put it into the rubber support in the front cover bracket.
3. Close the engine cover: gently lift the engine cover, remove the engine cover support rod, and then stuck it into the bracket in the front wall bracket; at a height of about 30cm away from the front wall lock bracket, let the engine hood fall freely and hold it without pressure!If the hood is not closed, it must be turned on again and then closed correctly.
4. First, open the door of the main driver of the Volkswagen Swift. There is a wrench under the central console (at the junction of the door and the car body, close to the floor). You can open the hood by pulling it outward with your hand. There is also a card in the center of the front of the hood, and you can lift the hood with two fingers and a pinch.
5. There is a strange sound in the engine. Symptom description: There is a high possibility of abnormal noise in the engine compartment. Most people also judge from the sound source that it is the abnormal sound of the engine compartment, which is usually a harsh metal sound or a wind whistle. Solution: The technical status of a certain mechanism of the engine has changed.
6. Next, we will share with you the diagram of the internal parts of the engine compartment, hoping to help you understand the structure and function of the internal parts of the engine compartment.Take the 4A13 engine as an example.
Everyone must first unlock the engine hatch from the car to open the engine compartment of the Touran, and there is an engine hatch unlocking door on the driver's side foot. Pull your hand, you can unlock it with one pull. After unlocking, the engine cover will bounce back a small gap. Put your hand into the gap above the car logo and lift the door handle to open the engine cover.
The Volkswagen Touran engine cover switch is in the cab, and the light switch is located below. You can open the engine cover by pulling the latch, and use the toppost to hold the engine cover. The engine cover has the function of protecting the engine and the effect of soundproofing.
Under the left front dashboard, the disassembly needs to pry out a card behind the handle.
The Touareg engine compartment lock switch is on the left leg of the cab, and the engine compartment lock will be unlocked by pulling the switch. After the engine compartment is unlocked, you can pull the lid in front of the engine compartment cover and lift the engine compartment cover. Then use the hydraulic rod of the engine cover to support the engine cover.
1. The engine compartment switch of Volkswagen Touareg is located in the lower left corner of the driver's seat, As shown in the figure below, we can lift the handle along the arrow, lift the engine cover and open it, then remove the engine cover support rod from its fixed bracket, and finally hang the engine cover support rod into the groove indicating the engine cover.
2. The engine hood switch of Volkswagen Touareg is located in the lower left corner of the driver's seat. As shown in the figure below, we can lift the handle along the arrow, lift the engine hood and open it, and then support the engine hood.Remove it from its fixing bracket, and finally hang the engine compartment cover support rod into the groove indicating the engine compartment cover.
3. To open the hood of SAIC Volkswagen Touareg, you need to enter the main driver's seat of the vehicle first and find the hood switch at the bottom left. Next, according to the operation method in the figure below, lift the hood switch of SAIC Volkswagen Touareg, and you can pop up the hood latch of SAIC Volkswagen Touareg.
4. The hood switch is in the car and needs to be turned on manually. The position of the switch is around the foot pedal. You can see that there is a switch button on the left side of the foot pedal. Press the switch to open the outer hood.
5. The switch of the Volkswagen Touareg hood is in the car, on the left side of the driver's seat. 02 On the left side of the foot pedal, we can see a device similar to a handle. If you open the handle along the arrow, the hood switch will open.03 Then lift the hood by hand and support it with a hydraulic cylinder.
6. The hood switch is in the car and needs to be turned on manually. The position of the switch is around the foot pedal. There is a switch button on the left side of the pedal. We can press the switch to open the outer hood. Put the hydraulic cylinder of the hood into the groove of the hood to support it.
HS code application in re-export scenarios
author: 2024-12-23 23:53HS code-driven cost variance analysis
author: 2024-12-23 23:04Pulp and paper HS code compliance
author: 2024-12-23 22:40HS code alignment with import licensing
author: 2024-12-23 22:36Precision instruments HS code verification
author: 2024-12-23 22:07Global trade index visualization
author: 2024-12-24 00:01Tire imports HS code classification
author: 2024-12-23 23:21Sourcing intelligence from customs data
author: 2024-12-23 23:00571.64MB
Check256.61MB
Check371.63MB
Check352.84MB
Check468.26MB
Check865.83MB
Check679.55MB
Check261.37MB
Check534.87MB
Check921.97MB
Check734.13MB
Check922.31MB
Check829.75MB
Check449.95MB
Check521.51MB
Check932.84MB
Check846.27MB
Check756.14MB
Check212.11MB
Check579.37MB
Check515.73MB
Check863.69MB
Check748.31MB
Check618.42MB
Check669.35MB
Check546.68MB
Check969.87MB
Check487.12MB
Check871.93MB
Check552.21MB
Check191.76MB
Check774.12MB
Check356.67MB
Check243.77MB
Check887.28MB
Check599.14MB
CheckScan to install
HS code intelligence in freight auditing to discover more
Netizen comments More
664 HS code utilization in digital trade documents
2024-12-23 23:17 recommend
1231 HS code trends in textiles and apparel
2024-12-23 22:53 recommend
1950 shipment data access
2024-12-23 22:45 recommend
901 Processed meat HS code verification
2024-12-23 22:30 recommend
271 How to ensure transparency in supply chains
2024-12-23 22:30 recommend