Brake system alarm light: an exclamation mark in a circle and a parenthesete on the outside. When the light is on, it means: the brake pad of the brake is seriously worn or failed; the brake fluid level is too low and deteriorated; the parking brake is turned on and closed; the brake light is on and the ABS is also on at the same time, indicating that the ABS is faulty; the brake system fails and other reasons.
The usual fault indicator light is an exclamation mark in the middle of the triangle. The following situations will light up: the clutch transmission clutch is overheated; the car's fuel supply system fails and there is no fuel; the parking sensor fails; the headlight is broken; the engine oil pressure sensor fails; the drive anti-skid system warns or fails.
The exclamation mark fault light is the reason why the system detects a fault or abnormal situation. When an exclamation mark appears on the dashboard of the car, there is an exclamation mark in the middle of the triangle.
Brake system failure is a common alarm situation. The alarm icon is an exclamation mark inside the circle and a small bracket outside the circle. In the idle state of the car, the dashboard of the handbrake will be displayed. This is a normal prompt. If it is still prompted after completely lowering the handbrake, it may be an abnormality of the brake system, which must Inspection and repair must be carried out in time.
Zhou Zhou talked about cars 2023-06-03 · TA got more than 362 likes. Follow. Expand all. What does the triangular exclamation mark on the dashboard mean? The triangle yellow indicator light on the dashboard. There is a yellow exclamation mark in the middle. The whole icon is yellow. This indicator light indicates the car. The indicator light of a conventional fault.
There is an exclamation mark in the middle of the triangle, which is a conventional fault display light. This light lights up to remind you to turn off the driving control system. If this light is on and always on when the drive system is started, it indicates that there is a problem with TCS. There is an exclamation mark in the middle of the bracket circle, which is the warning light of the brake system.
There are basically three types of exclamation mark warning lights on the dashboard of the car: an exclamation mark in the middle of the triangle, which is a conventional fault indicator light, and this indicator light is a TCS (drive force, that is, ground adhesion control system) indicator light.
There are about three kinds of exclamation mark warning lights on the car dashboard: an exclamation mark in the middle of the triangle, which is a conventional fault display light.
The exclamation mark on the dashboard of the car indicates that the car is malfunctioning. The specific introduction is as follows: conventional fault display light: an exclamation mark in the middle of the triangle. This is a conventional fault display light.
An exclamation mark in the middle of the triangle is a conventional fault display light; an exclamation mark appears in the middle of the bracket circle, which is a brake system warning light; bracketAn exclamation mark appears in the middle of the horizontal below the number, which is a tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
The meaning of the exclamation mark on the car is as follows: an exclamation mark in a light bulb is a bulb fault light. An exclamation mark in a gear is a gearbox fault light. An exclamation mark in a circle is a brake fault light. An exclamation mark next to the steering wheel is the steering assistance fault light.
Most of the red exclamation mark icons refer to the warning lights of the brake system. It will light up in the following conditions: the car will light up for a few seconds after turning on the ignition switch, and turn off after starting the engine. It lights up when you pull up the handbrake and turns off when you put it down. The brake fluid level is too low, and it lights up during driving.
Some cars light up for a few seconds after turning on the ignition switch, and turn off after starting the engine; it lights up when the hand brake is pulled up and turns off when it is put down; the brake fluid level is too low, and it lights up during driving; system The system malfunctions and lights up. There is an exclamation mark in the middle of the horizontal brackets.
Indicates that the gearbox is faulty or the lubricating oil needs to be replaced. The solution to the exclamation mark on the car: turn off the drive control system or check the maintenance TCS; go to the repair shop to check the air pressure of the tires and check whether there is any foreign matter on the surface of the tire; replace the lubricating oil or overhaul the gearbox.
When driving, if an exclamation mark warning light appears on the dashboard, it means that the vehicle is faulty and needs to be dealt with in time. Different exclamation marks represent different faults.If it is an exclamation mark with a circle and parentheses, as shown in the figure, this representative means the brake system fault light.
Conventional fault. There is an exclamation mark in the triangle. If this symbol lights up, it means that the normal performance of the car or the parts and functions have failed. There are mainly parking sensor failure, oil cut-off system intervention or failure, external light failure, engine oil pressure sensor failure, etc. You need to go to the 4S store for maintenance and find out the source of the fault.
1 exclamation mark in the middle of the triangle, which is the conventional fault display light, and 1 exclamation mark in the middle of the bracket circle, which is the brake system warning light. There is an exclamation mark in the middle of the horizontal part of the parentheses. This is the tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
The exclamation mark of the car fault light is a failure of the vehicle, reminding the owner that the vehicle needs to be overhauled. The car fault light indicates that there are many reasons, such as engine failure, gearbox failure, brake system failure, water temperature failure, etc. It is necessary to check and confirm the vehicle fault according to the display on the vehicle dashboard.
There are about three types of exclamation sign warning lights on the dashboard of the car: 1 exclamation mark in the middle of the triangle. This is a conventional fault display light, which mainly lights up in the following situations.
What is the reason why the exclamation mark fault light is on? The exclamation mark fault light is on is the reason why the system detects a fault or abnormal situation. The clutch of the dry dual-clutch gearbox is overheated. Parking sensor failure. The oil cut-off system intervenes or fails. The light bulb of the exterior light of the car is broken. Drive anti-skid system warning or failure.
1 exclamation mark in the middle of the triangle, which is the conventional fault display light, and an exclamation mark in the middle of the bracket circle, which is the brake system warning light. There is an exclamation mark in the middle of the horizontal part of the parentheses. This is the tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
1 exclamation mark in the middle of the triangle, which is a conventional fault indicator light, and this indicator light is a TCS (drive force, that is, ground adhesion control system) indicator light.
There are about three kinds of exclamation mark warning lights on the car dashboard: an exclamation mark in the middle of the triangle, which is a conventional fault display light.
The exclamation mark on the dashboard of the car indicates that the car is malfunctioning.The specific introduction is as follows: conventional fault display light: an exclamation mark in the middle of the triangle. This is a conventional fault display light.
The meaning of the exclamation mark on the car is as follows: an exclamation mark in a light bulb is a bulb fault light. An exclamation mark in a gear is a gearbox fault light. An exclamation mark in a circle is a brake fault light. An exclamation mark next to the steering wheel is the steering assistance fault light.
1 exclamation mark in the middle of the triangle is a conventional fault display light; an exclamation mark appears in the middle of the bracket circle, which is a brake system warning light; an exclamation mark appears in the horizontal middle below the bracket, which is a tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
Comprehensive supplier audit data-APP, download it now, new users will receive a novice gift pack.
Brake system alarm light: an exclamation mark in a circle and a parenthesete on the outside. When the light is on, it means: the brake pad of the brake is seriously worn or failed; the brake fluid level is too low and deteriorated; the parking brake is turned on and closed; the brake light is on and the ABS is also on at the same time, indicating that the ABS is faulty; the brake system fails and other reasons.
The usual fault indicator light is an exclamation mark in the middle of the triangle. The following situations will light up: the clutch transmission clutch is overheated; the car's fuel supply system fails and there is no fuel; the parking sensor fails; the headlight is broken; the engine oil pressure sensor fails; the drive anti-skid system warns or fails.
The exclamation mark fault light is the reason why the system detects a fault or abnormal situation. When an exclamation mark appears on the dashboard of the car, there is an exclamation mark in the middle of the triangle.
Brake system failure is a common alarm situation. The alarm icon is an exclamation mark inside the circle and a small bracket outside the circle. In the idle state of the car, the dashboard of the handbrake will be displayed. This is a normal prompt. If it is still prompted after completely lowering the handbrake, it may be an abnormality of the brake system, which must Inspection and repair must be carried out in time.
Zhou Zhou talked about cars 2023-06-03 · TA got more than 362 likes. Follow. Expand all. What does the triangular exclamation mark on the dashboard mean? The triangle yellow indicator light on the dashboard. There is a yellow exclamation mark in the middle. The whole icon is yellow. This indicator light indicates the car. The indicator light of a conventional fault.
There is an exclamation mark in the middle of the triangle, which is a conventional fault display light. This light lights up to remind you to turn off the driving control system. If this light is on and always on when the drive system is started, it indicates that there is a problem with TCS. There is an exclamation mark in the middle of the bracket circle, which is the warning light of the brake system.
There are basically three types of exclamation mark warning lights on the dashboard of the car: an exclamation mark in the middle of the triangle, which is a conventional fault indicator light, and this indicator light is a TCS (drive force, that is, ground adhesion control system) indicator light.
There are about three kinds of exclamation mark warning lights on the car dashboard: an exclamation mark in the middle of the triangle, which is a conventional fault display light.
The exclamation mark on the dashboard of the car indicates that the car is malfunctioning. The specific introduction is as follows: conventional fault display light: an exclamation mark in the middle of the triangle. This is a conventional fault display light.
An exclamation mark in the middle of the triangle is a conventional fault display light; an exclamation mark appears in the middle of the bracket circle, which is a brake system warning light; bracketAn exclamation mark appears in the middle of the horizontal below the number, which is a tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
The meaning of the exclamation mark on the car is as follows: an exclamation mark in a light bulb is a bulb fault light. An exclamation mark in a gear is a gearbox fault light. An exclamation mark in a circle is a brake fault light. An exclamation mark next to the steering wheel is the steering assistance fault light.
Most of the red exclamation mark icons refer to the warning lights of the brake system. It will light up in the following conditions: the car will light up for a few seconds after turning on the ignition switch, and turn off after starting the engine. It lights up when you pull up the handbrake and turns off when you put it down. The brake fluid level is too low, and it lights up during driving.
Some cars light up for a few seconds after turning on the ignition switch, and turn off after starting the engine; it lights up when the hand brake is pulled up and turns off when it is put down; the brake fluid level is too low, and it lights up during driving; system The system malfunctions and lights up. There is an exclamation mark in the middle of the horizontal brackets.
Indicates that the gearbox is faulty or the lubricating oil needs to be replaced. The solution to the exclamation mark on the car: turn off the drive control system or check the maintenance TCS; go to the repair shop to check the air pressure of the tires and check whether there is any foreign matter on the surface of the tire; replace the lubricating oil or overhaul the gearbox.
When driving, if an exclamation mark warning light appears on the dashboard, it means that the vehicle is faulty and needs to be dealt with in time. Different exclamation marks represent different faults.If it is an exclamation mark with a circle and parentheses, as shown in the figure, this representative means the brake system fault light.
Conventional fault. There is an exclamation mark in the triangle. If this symbol lights up, it means that the normal performance of the car or the parts and functions have failed. There are mainly parking sensor failure, oil cut-off system intervention or failure, external light failure, engine oil pressure sensor failure, etc. You need to go to the 4S store for maintenance and find out the source of the fault.
1 exclamation mark in the middle of the triangle, which is the conventional fault display light, and 1 exclamation mark in the middle of the bracket circle, which is the brake system warning light. There is an exclamation mark in the middle of the horizontal part of the parentheses. This is the tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
The exclamation mark of the car fault light is a failure of the vehicle, reminding the owner that the vehicle needs to be overhauled. The car fault light indicates that there are many reasons, such as engine failure, gearbox failure, brake system failure, water temperature failure, etc. It is necessary to check and confirm the vehicle fault according to the display on the vehicle dashboard.
There are about three types of exclamation sign warning lights on the dashboard of the car: 1 exclamation mark in the middle of the triangle. This is a conventional fault display light, which mainly lights up in the following situations.
What is the reason why the exclamation mark fault light is on? The exclamation mark fault light is on is the reason why the system detects a fault or abnormal situation. The clutch of the dry dual-clutch gearbox is overheated. Parking sensor failure. The oil cut-off system intervenes or fails. The light bulb of the exterior light of the car is broken. Drive anti-skid system warning or failure.
1 exclamation mark in the middle of the triangle, which is the conventional fault display light, and an exclamation mark in the middle of the bracket circle, which is the brake system warning light. There is an exclamation mark in the middle of the horizontal part of the parentheses. This is the tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
1 exclamation mark in the middle of the triangle, which is a conventional fault indicator light, and this indicator light is a TCS (drive force, that is, ground adhesion control system) indicator light.
There are about three kinds of exclamation mark warning lights on the car dashboard: an exclamation mark in the middle of the triangle, which is a conventional fault display light.
The exclamation mark on the dashboard of the car indicates that the car is malfunctioning.The specific introduction is as follows: conventional fault display light: an exclamation mark in the middle of the triangle. This is a conventional fault display light.
The meaning of the exclamation mark on the car is as follows: an exclamation mark in a light bulb is a bulb fault light. An exclamation mark in a gear is a gearbox fault light. An exclamation mark in a circle is a brake fault light. An exclamation mark next to the steering wheel is the steering assistance fault light.
1 exclamation mark in the middle of the triangle is a conventional fault display light; an exclamation mark appears in the middle of the bracket circle, which is a brake system warning light; an exclamation mark appears in the horizontal middle below the bracket, which is a tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
How to benchmark import export performance
author: 2024-12-24 01:37HS code-based container load planning
author: 2024-12-24 01:35Integrated circuits HS code verification
author: 2024-12-24 00:34Trade data for food and beverage industry
author: 2024-12-23 23:59Global tender participation by HS code
author: 2024-12-24 01:00Functional foods HS code verification
author: 2024-12-24 00:57Maritime logistics HS code mapping
author: 2024-12-23 23:44Solar panel imports HS code references
author: 2024-12-23 23:19179.31MB
Check423.43MB
Check338.51MB
Check435.71MB
Check199.19MB
Check898.55MB
Check831.13MB
Check862.27MB
Check755.42MB
Check816.74MB
Check328.96MB
Check834.41MB
Check149.41MB
Check312.84MB
Check858.11MB
Check194.49MB
Check273.63MB
Check656.91MB
Check239.47MB
Check796.17MB
Check391.29MB
Check634.59MB
Check897.47MB
Check825.89MB
Check857.37MB
Check593.22MB
Check125.45MB
Check946.87MB
Check945.65MB
Check256.53MB
Check334.41MB
Check763.71MB
Check323.61MB
Check733.37MB
Check739.47MB
Check886.55MB
CheckScan to install
Comprehensive supplier audit data to discover more
Netizen comments More
2539 HS code correlation with duty rates
2024-12-24 01:27 recommend
2042 Australia HS code tariff insights
2024-12-24 01:22 recommend
2025 Trade data for chemical imports
2024-12-24 01:11 recommend
2826 Predictive analytics for supplier risks
2024-12-24 00:59 recommend
1041 How to interpret trade deficit data
2024-12-24 00:12 recommend