1. Wuling Zhiguang Xiaoka is equipped with a 2L The four-cylinder naturally aspirated engine has a maximum power of 57 horsepower and a peak torque of 103 Nm. The engine adopts multi-point electric injection technology and meets the national V emission standards.
2. The Wuling Rongguang small car double-row 2 engine model should be LAQ. The engine adopts the latest in-line four-cylinder 16-valve, double overhead camshaft and plastic intake manifold and other technologies, with a lifting power of 52kW/L and a rated power of 63kW.
3. Wuling Glory 1.2 National five double-row small card engine model: LAQ, displacement (mL): 1206, air intake form: natural intake, cylinder arrangement form: L, number of cylinders (pieces): 4, number of valves per cylinder (pieces): 4, compression ratio: 9.8, gas distribution mechanism: DOHC.
1. Engine lack of cylinder, engine lack of cylinder mainly refers to one or more cylinders in the engine not working properly, which is manifested as: the exhaust gas flow discharged by the car has obvious intervals, and the exhaust pipe shakes heavily, which can obviously feel the shaking of the engine, sometimes accompanied by a sudden sound.
2. The common thing is that the throttle valve is dirty orIf the throttle valve fails, it will lead to idling jitter. The main reason why the throttle valve is dirty is that there is carbon accumulation at the junction of the shaft of the throttle valve plate and the throttle body, resulting in the opening of the throttle valve not being accurate enough, so the idle speed will shake.
3. I. Failure of the electronic control system, such as the sensor signal is missing or the signal is misalignified, the control signal is wrong or there is no signal output, the spark plug or ignition coil is damaged and the inability to ignite, the fuel injector does not inject oil and the line failure, etc.
4. The most common cause of car shaking is that the throttle valve is too dirty or the fuel injector has too much carbon.
5. Air intake system (1) Leakage of intake manifold or various valves When air, gasoline steam and combustion exhaust gas that should not enter enter the intake manifold, the mixture is too thick or too thin, causing the engine to burn abnormally.When the air leakage position only affects individual cylinders, the engine will shake more violently, which has a greater impact on the idling speed of the cold car.
1. The displacement and power are different. 2 stands for a 2-liter engine, while 5 stands for a 5-liter engine.Different displacements mean that the size and volume of the engine are different. The 5-liter engine has a larger volume and higher power.
2. Power and torque: Due to the difference in engine displacement, Wuling minivan 2 and 5 are also different in power and torque. The power and torque of the 5L engine are higher than those of the 2L engine, and the Wuling minivan 5 has better performance in terms of load and acceleration.
3. Engine displacement, fuel economy. Engine displacement: The engine displacement of Glory Card 2 is 2 liters, while the engine displacement of Glory Card 5 is 5 liters. Large displacement means greater power output capacity. Fuel economy: Engines with small displacement are better in terms of fuel economy.
4. The body specifications are different. The body specifications of the 2L model are 4390*1660*1750MM, and the wheelbase is 2720MM.THE BODY SPECIFICATION OF THE 5L MODEL IS 4420*1685*1770MM, AND THE WHEELBASE IS 2720MM.
5. Wuling Truck 2 and 5 displacements are the two displacement models of Wuling Glory. Their differences are: different maximum torque, different rated power, different compression ratio, different maximum torque. Wuling Truck 2: Maximum torque (Nm/rpm) 116/3600-4000.
Real-time delivery time predictions-APP, download it now, new users will receive a novice gift pack.
1. Wuling Zhiguang Xiaoka is equipped with a 2L The four-cylinder naturally aspirated engine has a maximum power of 57 horsepower and a peak torque of 103 Nm. The engine adopts multi-point electric injection technology and meets the national V emission standards.
2. The Wuling Rongguang small car double-row 2 engine model should be LAQ. The engine adopts the latest in-line four-cylinder 16-valve, double overhead camshaft and plastic intake manifold and other technologies, with a lifting power of 52kW/L and a rated power of 63kW.
3. Wuling Glory 1.2 National five double-row small card engine model: LAQ, displacement (mL): 1206, air intake form: natural intake, cylinder arrangement form: L, number of cylinders (pieces): 4, number of valves per cylinder (pieces): 4, compression ratio: 9.8, gas distribution mechanism: DOHC.
1. Engine lack of cylinder, engine lack of cylinder mainly refers to one or more cylinders in the engine not working properly, which is manifested as: the exhaust gas flow discharged by the car has obvious intervals, and the exhaust pipe shakes heavily, which can obviously feel the shaking of the engine, sometimes accompanied by a sudden sound.
2. The common thing is that the throttle valve is dirty orIf the throttle valve fails, it will lead to idling jitter. The main reason why the throttle valve is dirty is that there is carbon accumulation at the junction of the shaft of the throttle valve plate and the throttle body, resulting in the opening of the throttle valve not being accurate enough, so the idle speed will shake.
3. I. Failure of the electronic control system, such as the sensor signal is missing or the signal is misalignified, the control signal is wrong or there is no signal output, the spark plug or ignition coil is damaged and the inability to ignite, the fuel injector does not inject oil and the line failure, etc.
4. The most common cause of car shaking is that the throttle valve is too dirty or the fuel injector has too much carbon.
5. Air intake system (1) Leakage of intake manifold or various valves When air, gasoline steam and combustion exhaust gas that should not enter enter the intake manifold, the mixture is too thick or too thin, causing the engine to burn abnormally.When the air leakage position only affects individual cylinders, the engine will shake more violently, which has a greater impact on the idling speed of the cold car.
1. The displacement and power are different. 2 stands for a 2-liter engine, while 5 stands for a 5-liter engine.Different displacements mean that the size and volume of the engine are different. The 5-liter engine has a larger volume and higher power.
2. Power and torque: Due to the difference in engine displacement, Wuling minivan 2 and 5 are also different in power and torque. The power and torque of the 5L engine are higher than those of the 2L engine, and the Wuling minivan 5 has better performance in terms of load and acceleration.
3. Engine displacement, fuel economy. Engine displacement: The engine displacement of Glory Card 2 is 2 liters, while the engine displacement of Glory Card 5 is 5 liters. Large displacement means greater power output capacity. Fuel economy: Engines with small displacement are better in terms of fuel economy.
4. The body specifications are different. The body specifications of the 2L model are 4390*1660*1750MM, and the wheelbase is 2720MM.THE BODY SPECIFICATION OF THE 5L MODEL IS 4420*1685*1770MM, AND THE WHEELBASE IS 2720MM.
5. Wuling Truck 2 and 5 displacements are the two displacement models of Wuling Glory. Their differences are: different maximum torque, different rated power, different compression ratio, different maximum torque. Wuling Truck 2: Maximum torque (Nm/rpm) 116/3600-4000.
HS code mapping to logistics KPIs
author: 2024-12-24 00:18Real-time freight capacity insights
author: 2024-12-23 23:23WTO trade compliance resources
author: 2024-12-23 23:21Data-driven trade invoice verification
author: 2024-12-23 22:41Trade data visualization dashboards
author: 2024-12-23 22:40How to use analytics for HS classification
author: 2024-12-23 23:39Holistic international trade reports
author: 2024-12-23 23:22Trade data for pharmaceutical imports
author: 2024-12-23 23:22Industry consolidation via HS code data
author: 2024-12-23 22:59Long-tail trade keyword research
author: 2024-12-23 22:47777.21MB
Check926.82MB
Check485.58MB
Check282.11MB
Check613.59MB
Check444.72MB
Check314.12MB
Check367.67MB
Check112.54MB
Check882.52MB
Check441.83MB
Check322.95MB
Check959.13MB
Check326.85MB
Check628.19MB
Check385.41MB
Check715.67MB
Check914.83MB
Check312.22MB
Check227.29MB
Check628.97MB
Check429.46MB
Check152.83MB
Check719.11MB
Check297.24MB
Check546.16MB
Check378.53MB
Check648.49MB
Check814.17MB
Check771.41MB
Check412.13MB
Check854.44MB
Check452.68MB
Check921.14MB
Check576.62MB
Check971.39MB
CheckScan to install
Real-time delivery time predictions to discover more
Netizen comments More
373 Global trade analytics for decision-makers
2024-12-24 00:35 recommend
51 Container-level shipment data
2024-12-24 00:32 recommend
2610 How to comply with export licensing
2024-12-24 00:02 recommend
1989 Supply chain data
2024-12-23 23:28 recommend
2508 Pharmaceuticals (HS code ) export data
2024-12-23 22:06 recommend