1. Use the partition tool to format the partition first and then install the system. BIO.S settings start up and press the corresponding key (Delete, F2 are more commonly used according to different choices of BIOS, generally there are prompts on the screen) to enter the BIOS settings. CD-ROM startup finds the boot startup item and sets it to "CD-ROM" startup. Put in the CD and save to exit.
2. Enter the installation 1) Restart the computer and move the highlight bar to the CDROM with the arrow key. At this time, insert the XP CD into the optical drive 2) When Press any key to boot from CD appears, immediately return 3) For a moment, the screen appears welcome In the installer interface, select Install Now.
3. After restarting, take out the CD, let the computer start from the hard disk, and enter the setting window of XP. Press "Next", "Skip", and select "Do not register" and "Done".Enter the XP system desktop.
4. After restarting, enter the XP desktop. At this time, the desktop only has the recycle bin shortcut icon and the taskbar. Right-click on the desktop, select "Properties"--"Desktop"--"Custom Desktop"--check "My Computer", "Online Neighbors", etc.--"OK" and return to the desktop. .
5. The grid machine you are talking about is to reinstall the system. The following are the specific steps to reinstall the system. Prepare the installation disk and prepare an XP installation disk with startup function. Prepare a hard disk Prepare an initialized hard disk (i.e. a partitioned, formatted hard disk with enough space to accommodate XP system files).
1. The specific steps are as follows. First of all, we need an installation tool to help us complete the system reinstallation. Download Fat Claw Installation Assistant:, and then click "Software Download" to complete the installation of the program. You need to pay attention to turning off the third-party anti-virus software on the computer, otherwise it will cause false alarms.
2. Prepare a Windows XP CD, write down the installation serial number of the CD on the paper, and then you can start installing the system. To use the CD-ROM installation, you must first set the computer in the BIOS to start from the CD-ROM, that is, when the computer starts, press the Del key in the self-test. After the self-test, the BIOS interface will be displayed.
3. The specific operation is as follows: First, go to the system download base to download the deep technology GHOST XP SP3 operating system.Then unzip the downloaded XP operating system to disk D, and never decompress it to disk C.
4. Restart the computer after completion. 8) After starting, load the device program without intervention. 9) The next step is to follow the prompts.
1, · Key point one: Enter the serial number Here we need to enter the serial number of Windows XP to proceed to the next installation. Generally speaking, we can Find the serial number on the box. · Point 2: Set up a network connection. The network is an important part of the XP system and is also indispensable for current life.
2. Put in the XP installation CD before restarting, and press Enter when you see the CD word at the bottom of the screen.Only then can the light start, otherwise the computer will start to read the hard disk, that is, skip the light start to start from the hard disk.
3. The easiest way is to reinstall the system. The general way to install the system with a USB flash drive: make a PE boot disk and make a PE boot disk with a USB flash drive. FOR WIN10/W7 SYSTEM, PLEASE USE A USB DISK ABOVE 8G, AND A USB DISK ABOVE 4G FOR XP SYSTEM. THE LARGER THE CAPACITY, THE MORE SYSTEMS WILL BE STORED. DOWNLOAD PE BOOT USB DISK MAKING SOFTWARE SUCH LIKE DEPTH AND CABBAGE, AND MAKE THE BOOT DISK ACCORDING TO THE PROMPTS.
4. The grid machine you mentioned is to reinstall the system. The following are the specific steps to reinstall the system. Prepare the installation disk and prepare an XP installation disk with startup function. Prepare a hard disk Prepare an initialized hard disk (i.e. a partitioned, formatted hard disk with enough space to accommodate XP system files).
End-to-end global logistics analytics-APP, download it now, new users will receive a novice gift pack.
1. Use the partition tool to format the partition first and then install the system. BIO.S settings start up and press the corresponding key (Delete, F2 are more commonly used according to different choices of BIOS, generally there are prompts on the screen) to enter the BIOS settings. CD-ROM startup finds the boot startup item and sets it to "CD-ROM" startup. Put in the CD and save to exit.
2. Enter the installation 1) Restart the computer and move the highlight bar to the CDROM with the arrow key. At this time, insert the XP CD into the optical drive 2) When Press any key to boot from CD appears, immediately return 3) For a moment, the screen appears welcome In the installer interface, select Install Now.
3. After restarting, take out the CD, let the computer start from the hard disk, and enter the setting window of XP. Press "Next", "Skip", and select "Do not register" and "Done".Enter the XP system desktop.
4. After restarting, enter the XP desktop. At this time, the desktop only has the recycle bin shortcut icon and the taskbar. Right-click on the desktop, select "Properties"--"Desktop"--"Custom Desktop"--check "My Computer", "Online Neighbors", etc.--"OK" and return to the desktop. .
5. The grid machine you are talking about is to reinstall the system. The following are the specific steps to reinstall the system. Prepare the installation disk and prepare an XP installation disk with startup function. Prepare a hard disk Prepare an initialized hard disk (i.e. a partitioned, formatted hard disk with enough space to accommodate XP system files).
1. The specific steps are as follows. First of all, we need an installation tool to help us complete the system reinstallation. Download Fat Claw Installation Assistant:, and then click "Software Download" to complete the installation of the program. You need to pay attention to turning off the third-party anti-virus software on the computer, otherwise it will cause false alarms.
2. Prepare a Windows XP CD, write down the installation serial number of the CD on the paper, and then you can start installing the system. To use the CD-ROM installation, you must first set the computer in the BIOS to start from the CD-ROM, that is, when the computer starts, press the Del key in the self-test. After the self-test, the BIOS interface will be displayed.
3. The specific operation is as follows: First, go to the system download base to download the deep technology GHOST XP SP3 operating system.Then unzip the downloaded XP operating system to disk D, and never decompress it to disk C.
4. Restart the computer after completion. 8) After starting, load the device program without intervention. 9) The next step is to follow the prompts.
1, · Key point one: Enter the serial number Here we need to enter the serial number of Windows XP to proceed to the next installation. Generally speaking, we can Find the serial number on the box. · Point 2: Set up a network connection. The network is an important part of the XP system and is also indispensable for current life.
2. Put in the XP installation CD before restarting, and press Enter when you see the CD word at the bottom of the screen.Only then can the light start, otherwise the computer will start to read the hard disk, that is, skip the light start to start from the hard disk.
3. The easiest way is to reinstall the system. The general way to install the system with a USB flash drive: make a PE boot disk and make a PE boot disk with a USB flash drive. FOR WIN10/W7 SYSTEM, PLEASE USE A USB DISK ABOVE 8G, AND A USB DISK ABOVE 4G FOR XP SYSTEM. THE LARGER THE CAPACITY, THE MORE SYSTEMS WILL BE STORED. DOWNLOAD PE BOOT USB DISK MAKING SOFTWARE SUCH LIKE DEPTH AND CABBAGE, AND MAKE THE BOOT DISK ACCORDING TO THE PROMPTS.
4. The grid machine you mentioned is to reinstall the system. The following are the specific steps to reinstall the system. Prepare the installation disk and prepare an XP installation disk with startup function. Prepare a hard disk Prepare an initialized hard disk (i.e. a partitioned, formatted hard disk with enough space to accommodate XP system files).
Comparative HS code duty analysis
author: 2024-12-23 22:28Trade data-driven market penetration
author: 2024-12-23 22:03How to improve trade compliance
author: 2024-12-23 21:30Aggregated global trade insights dashboard
author: 2024-12-23 20:28Global trade data-driven asset utilization
author: 2024-12-23 22:38Global trade alerts and updates
author: 2024-12-23 21:33Trade data solutions for freight forwarders
author: 2024-12-23 20:52HS code-driven supplier performance metrics
author: 2024-12-23 20:21679.25MB
Check482.95MB
Check283.11MB
Check913.77MB
Check988.93MB
Check441.24MB
Check997.89MB
Check993.23MB
Check621.66MB
Check377.98MB
Check681.44MB
Check656.24MB
Check939.63MB
Check332.47MB
Check211.37MB
Check418.32MB
Check328.64MB
Check579.41MB
Check358.55MB
Check488.51MB
Check298.63MB
Check614.18MB
Check871.74MB
Check513.22MB
Check255.14MB
Check642.43MB
Check146.83MB
Check543.39MB
Check281.54MB
Check839.21MB
Check171.49MB
Check621.85MB
Check249.11MB
Check911.51MB
Check555.74MB
Check198.17MB
CheckScan to install
End-to-end global logistics analytics to discover more
Netizen comments More
1556 Apparel HS code mapping for global exports
2024-12-23 22:54 recommend
421 Plastics (HS code ) import analysis
2024-12-23 21:45 recommend
258 Dairy powder HS code references
2024-12-23 20:27 recommend
1761 How to integrate trade data into workflows
2024-12-23 20:24 recommend
1940 Detailed trade data mapping tools
2024-12-23 20:21 recommend