After entering the USB disk installation master boot menu, select "0 start Windows_2003PE (old machine)" or "0 start Windows_8" through the up and down keys _x64PE (new machine)" option, which can be selected according to the actual situation of your own machine.
· Key point 1: Set the optical drive as the first startup item in the BIOS.The method of entering the BIOS varies depending on the BIOS. Generally speaking, pressing the Del key or the F2 key after the power-on self-test is passed.
Put the system CD into the optical drive, restart the computer, and move the highlight bar to the CDROM with the arrow key 2) When Press any key to boot from CD appears, press 3) After a moment, the welcome installer interface appears on the screen, select Now Pretend.
The editor of this article will bring you the whole process of reinstalling the xp system.
If the computer configuration used by users is low, it is recommended to install and use the windowsxp system that takes up less resources. The windowsxp system is very good in terms of system interface and system performance. OnlySome users don't know how to install the windowsxp system, so you might as well refer to the following tutorial steps to install the system windowsxp.
One-click recovery disk installation Buy an XP one-click recovery disk can be partitioned during installation. Partition tool installation uses the partition tool, format the partition first and then install the system. When the BIOS settings are turned on, press the corresponding key (Delete, F2 are more commonly used according to different choices of the BIOS, and there are generally prompts on the screen) to enter the BIOS settings.
Select AdVanced BIOS Features option, press Enter to enter the setting program. Select the First Boot Device option, and then press the Page Up or Page Down key on the keyboard to set the item to CD-ROM, so that the system can be changed to CD-ROM to start. Save BIOS settings and return to the main menu to save BIOS settings.
Prepare the installation CD of Windows Simplified Chinese version and follow the steps below to install it. If disk scanning is possible, use the disk scanner to scan all hard disks to check and repair hard disk errors before running the installer, otherwise it will be troublesome to check for hard disk errors when the installer is running.
Select [1] Install the system to the first partition of the hard disk;Go to this interface and perform the system decompression operation; restart automatically after decompression and start reinstalling the windowsxp operating system; restart to enter the windowsxp desktop after reinstalling. Follow the graphic and text steps introduced above to reinstall the windowsxp system with a USB flash drive.
1. First, prepare a USB flash drive with a capacity greater than 1G, and then download the USB disk installation master USB disk boot disk production tool to make it into a USB disk boot disk. To download the GHOST XP system online, you can search by yourself on Baidu. The downloaded format is generally ISO or GHO, and then put it in the GHO folder in the USB flash drive.
2. · Key point one: Set the optical drive as the first startup item in the BIOS. The method of entering the BIOS varies depending on the BIOS. Generally speaking, pressing the Del key or the F2 key after the power-on self-test is passed.
3. Step 2: Select the system installation partition. After starting the system from the optical drive, you will see the Windows XP installation welcome page as shown in Figure 3.According to the screen prompts, press Enter to continue the next installation process.
4. The xp system has been launched for more than ten years, but as a classic operating system, there are still many supporters around the world. How do we use the USB flash drive to install the xp system? In fact, it only takes a few simple steps to complete it. Next, let's talk about the detailed steps and tutorials of the USB flash drive installation xp system. Let's take a look.
Automated import export risk alerts-APP, download it now, new users will receive a novice gift pack.
After entering the USB disk installation master boot menu, select "0 start Windows_2003PE (old machine)" or "0 start Windows_8" through the up and down keys _x64PE (new machine)" option, which can be selected according to the actual situation of your own machine.
· Key point 1: Set the optical drive as the first startup item in the BIOS.The method of entering the BIOS varies depending on the BIOS. Generally speaking, pressing the Del key or the F2 key after the power-on self-test is passed.
Put the system CD into the optical drive, restart the computer, and move the highlight bar to the CDROM with the arrow key 2) When Press any key to boot from CD appears, press 3) After a moment, the welcome installer interface appears on the screen, select Now Pretend.
The editor of this article will bring you the whole process of reinstalling the xp system.
If the computer configuration used by users is low, it is recommended to install and use the windowsxp system that takes up less resources. The windowsxp system is very good in terms of system interface and system performance. OnlySome users don't know how to install the windowsxp system, so you might as well refer to the following tutorial steps to install the system windowsxp.
One-click recovery disk installation Buy an XP one-click recovery disk can be partitioned during installation. Partition tool installation uses the partition tool, format the partition first and then install the system. When the BIOS settings are turned on, press the corresponding key (Delete, F2 are more commonly used according to different choices of the BIOS, and there are generally prompts on the screen) to enter the BIOS settings.
Select AdVanced BIOS Features option, press Enter to enter the setting program. Select the First Boot Device option, and then press the Page Up or Page Down key on the keyboard to set the item to CD-ROM, so that the system can be changed to CD-ROM to start. Save BIOS settings and return to the main menu to save BIOS settings.
Prepare the installation CD of Windows Simplified Chinese version and follow the steps below to install it. If disk scanning is possible, use the disk scanner to scan all hard disks to check and repair hard disk errors before running the installer, otherwise it will be troublesome to check for hard disk errors when the installer is running.
Select [1] Install the system to the first partition of the hard disk;Go to this interface and perform the system decompression operation; restart automatically after decompression and start reinstalling the windowsxp operating system; restart to enter the windowsxp desktop after reinstalling. Follow the graphic and text steps introduced above to reinstall the windowsxp system with a USB flash drive.
1. First, prepare a USB flash drive with a capacity greater than 1G, and then download the USB disk installation master USB disk boot disk production tool to make it into a USB disk boot disk. To download the GHOST XP system online, you can search by yourself on Baidu. The downloaded format is generally ISO or GHO, and then put it in the GHO folder in the USB flash drive.
2. · Key point one: Set the optical drive as the first startup item in the BIOS. The method of entering the BIOS varies depending on the BIOS. Generally speaking, pressing the Del key or the F2 key after the power-on self-test is passed.
3. Step 2: Select the system installation partition. After starting the system from the optical drive, you will see the Windows XP installation welcome page as shown in Figure 3.According to the screen prompts, press Enter to continue the next installation process.
4. The xp system has been launched for more than ten years, but as a classic operating system, there are still many supporters around the world. How do we use the USB flash drive to install the xp system? In fact, it only takes a few simple steps to complete it. Next, let's talk about the detailed steps and tutorials of the USB flash drive installation xp system. Let's take a look.
Solar panel imports HS code references
author: 2024-12-23 21:30Rubber exports HS code classification
author: 2024-12-23 21:24Raw materials HS code intelligence
author: 2024-12-23 21:09Real-time HS code data integration
author: 2024-12-23 20:39Trade compliance tools for exporters
author: 2024-12-23 20:18End-to-end supplier lifecycle management
author: 2024-12-23 22:23How to reduce import export costs
author: 2024-12-23 21:31How to find niche import markets
author: 2024-12-23 20:32Refined metals HS code references
author: 2024-12-23 20:22245.92MB
Check576.11MB
Check985.75MB
Check927.76MB
Check864.67MB
Check682.55MB
Check599.59MB
Check224.16MB
Check786.89MB
Check266.89MB
Check738.29MB
Check995.38MB
Check866.63MB
Check299.51MB
Check266.35MB
Check778.56MB
Check921.41MB
Check257.95MB
Check662.17MB
Check855.71MB
Check254.84MB
Check517.48MB
Check741.41MB
Check464.35MB
Check366.48MB
Check411.47MB
Check924.26MB
Check328.44MB
Check262.18MB
Check818.85MB
Check432.98MB
Check841.82MB
Check538.92MB
Check347.45MB
Check637.94MB
Check272.77MB
CheckScan to install
Automated import export risk alerts to discover more
Netizen comments More
1418 High-value electronics HS code checks
2024-12-23 22:19 recommend
1957 Export quota monitoring software
2024-12-23 21:12 recommend
374 Trade data for resource allocation
2024-12-23 20:52 recommend
647 Industry-wise trade data breakdowns
2024-12-23 20:36 recommend
639 Trade intelligence for luxury goods
2024-12-23 20:17 recommend